Tronxy Veho 600 Pro V2 Large 3D Printer Klipper Corexy Fast 300mm/s High Speed Printing 600x600x600mm

Using the Klipper system

Can be remotely controlled via LAN

Corexy printing structure

3D Touch leveling induction

Ceramic heating printing head

LED strip lighting

Support remote control over local area networks, supports remote control of printing on both PC and mobile phones, enabling printing anytime, anywhere, offline printing can also be achieved through a USB flash drive in offline mode.

The lightweight print head combined with Corexy structure is more conducive to high-speed operation, the maximum printing speed is 300mm/s and the acceleration is 10000/s.

The X-axis Adopts a Linear Guide Rail

Smooth and stable high-speed operation

Better Leveling Experience

Configure a 3D Touch leveling sensor with contact sensing for higher leveling accuracy.

Ceramic Heating Printing Head

The printing head is heated using ceramic sheets, which have a faster heating speed.

Lightweight Print Head

The extruder adopts an all metal mini extruder, which is lightweight and smooth for extrusion, lightweight design is more conducive to high-speed movement.

With Built-in Lighting

Equipped with LED lighting strips, providing all-round supplementary lighting, you can also clearly observe the printing details when printing in a dim environment.

Automatically Adjust the XY Axis Belt

The X/Y belt adopts spring mechanical thrust, which can automatically adjust the belt tension.

Faster and More Uniform Preheating of the Hot Bed

The preheating of the hot bed adopts AC, with a short heating time and uniform heating of each part.

More Stable and Durable Metal Guide Rails

All guide rails are made of OSG external dual axis metal guide rails, the XYZ axis runs smoother and has a longer lifespan.

Configure Four Ball Screws

The ball screw transmission system is a point contact rolling motion, with low friction resistance, high sensitivity, no vibration during startup, and no crawling phenomenon at low speeds. Therefore, it can precisely control micro feed.

Stronger Motor

The X/Y axis adopts a 42 step high-speed motor, which is strongly driven to ensure more stable printing.

Broken Material Detector

When consumables are detected to be depleted or disconnected, printing can be paused in a timely manner, after inserting consumables, printing can continue.

Equipped with manually adjustable pulley foot pads for convenient movement of large format 3D printer.
●Raise the foot mat to easily move the machine. ●Lower the foot mat, the machine cannot be moved.

Mechanical Gorilla

Model Size: 408*43*350mm
Printing Layer Thickness: 0.3mm
Printing Speed: 200mm/s
Printing Time: 69 hours

Rabbit Helmet

Model Size: 383*473*224mm
Printing Layer Thickness: 0.3mm
Printing Speed: 200mm/s
Printing Time: 13 hours

Rocket

Model Size: 408*86*535mm
Printing Layer Thickness: 0.3mm
Printing Speed: 200mm/s
Printing Time: 11 hours 45 minutes