Tronxy PVA Filament: Water-Soluble 3D Support Filament 1.75mm 0.5KG Spool for 3D Printers
$39.99
| Retail | 1 Spool | No Quality Limited |
| Wholesale Sample | 1 Spool | Only Can Order 1 |
| Wholesale Bulk | 200 Spool | $18.99 Each Ship by Sea |
Estimated Delivery by
PVA Filament Water Soluble Support 3D Printer Filament
About this 1.75 mm PVA Filament:
【Attention Please】This Clear Near Nature filament is optimized PVA, which avoids the problems of easy breakage, severe moisture, and difficult storage caused by PVA being too soluble in water. Therefore, this PVA dissolvable filament is insoluble in water at room temperature, but it will soften at a water temperature of 55-60°C to achieve the purpose of easily removing the support. If you want PVA filament that is completely soluble in water, please do not buy this product. If your main purpose is to remove the support more easily and you don't care whether the PVA completely melts in the water, then this PVA is a better choice.【Water Soluble PVA】Water soluble Polymer. Not completely dissolved, but softening and layering,then peel off with your hands. It will not Damage Printed Surface. Good Bonding to Various Material Such as PLA. Environmental-friendly and Non-toxic. Ideal for Complex PVA 3d printing!
read more
Frequently Bought Together
Details
Instructions for use
1. The recommended printing temperature is 200°C; Bed temperature: 60°C; Due to the characteristics of the filament itself, if the setting temperature exceeds the recommended range of 200°C, it is easy to cause plugging.
2. Fan speed: 100%; Print speed: 20–40mm/s (recommended 30mm/s).
3. It is recommended to use about 55°C - 65°C warm water to loosen the PVA supports faster. The higher the temperature, the faster the PVA dissolves and falls.
Good choice for support filament
1. Thanks to its softening in water, it makes possible to print complex models and mobile constructions that no longer need to be assembled from individual parts.
2. After the PVA layeres and softens, it is very easy to peel off the model by hand.
Remove the support more easily
This filament is optimized PVA, which avoids the problems of easy breakage, severe moisture, and difficult storage caused by PVA being too soluble in water.
Therefore, this PVA filament is insoluble in water at room temperature, but it will soften at a water temperature of 55-65°C to achieve the purpose of easily removing the support.
If your main purpose is to remove the support more easily and you don't care whether the PVA completely melts in the water, then this PVA is a better choice.
Designed for dual extrusion 3D printers
Used to print support structures
Q: Why is the support material needed in 3D printing?
A: The support structure is a necessary auxiliary filament in 3D printing. You need them to print difficult overhangs and bridges in your model.
Q: How to print water-soluble PVA filament along with other filaments?
A: If you have a printer with two extruders, you can load one extruder with PLA to print the model and the other with a water-soluble material such as PVA or limonene-soluble material to print the support structure.
Q: What are the pressure parameter settings of PVA filament water soluble?
A: Printing temperature: 190-200°C (recommended temperature 200°C)
Bed temperature: 55-65°C
Fan speed: 100%
Print speed: 20–40mm/s (recommended 30mm/s);
Recommended Heated Build Platform: Structured Paper, PEI
Q: Can the model printed with this water-soluble PVA filament be completely dissolvedin water?
A: The support of the model can be softened at about 60° C and physically peeled off to remove the support. Please note that it has not completely dissolved in water.
Q:What filament can be printed along with PVA filament?
A: PVA water-soluble filament can be printed along with most filament on the market, such as PLA, PETG, TPU, etc.
Tronxy PVA Filament water soluble filament 3D printer filament 1.75mm filament support material 3D printing accessories environmental-friendly filament complex model printing
Water-soluble PVA filament needed to 3D print complex models and water-soluble support is easier to remove than regular support filament. If you have a printer with two extruders, you can load one extruder with PLA for printing models and another with PVA for printing support structures.
You need PVA to print difficult overhangs and bridges in your model. After printing, the model is immersed in 55-65℃ warm water for softening, and after layering, the PVA support structure is peeled off by hand and washed off. It reduces the risk of model damage and makes post-processing easier.
Instructions for use
Ideal for Supporting Complex Structural Models
Good choice for support filament
Not Dissolved in water, But softened and layered.
Remove the support more easily
Attention Please
Designed for dual extrusion 3D printers
Used to print support structures
Q: Why is the support material needed in 3D printing?
A: The support structure is a necessary auxiliary filament in 3D printing. You need them to print difficult overhangs and bridges in your model.
Q: How to print water-soluble PVA filament along with other filaments?
A: If you have a printer with two extruders, you can load one extruder with PLA to print the model and the other with a water-soluble material such as PVA or limonene-soluble material to print the support structure.
Q: What are the pressure parameter settings of PVA filament water soluble?
A: Printing temperature: 190-200°C (recommended temperature 200°C)
Bed temperature: 55-65°C
Fan speed: 100%
Print speed: 20–40mm/s (recommended 30mm/s);
Recommended Heated Build Platform: Structured Paper, PEI
Q: Can the model printed with this water-soluble PVA filament be completely dissolvedin water?
A: The support of the model can be softened at about 60° C and physically peeled off to remove the support. Please note that it has not completely dissolved in water.
Q:What filament can be printed along with PVA filament?
A: PVA water-soluble filament can be printed along with most filament on the market, such as PLA, PETG, TPU, etc.
- Q: What is Tronxy PVA Filament?
A: Tronxy PVA Filament is a special type of 3D printing material that dissolves in water. It is designed to support complex models during printing, making it easier to create intricate designs. This filament is 1.75mm in diameter and comes in a 0.5kg spool. - Q: How does PVA Filament work?
A: PVA Filament works by providing support to 3D printed models. When you print a model with overhangs or complex shapes, you can use PVA as the support material. After printing, you can remove the support by soaking it in warm water, which softens the PVA. - Q: Can I use PVA Filament with other materials?
A: Yes, PVA Filament can be used alongside other materials like PLA, PETG, and TPU. If you have a dual-extruder 3D printer, you can load one extruder with PVA for support and the other with your main printing material. - Q: What temperature should I print PVA Filament at?
A: The recommended printing temperature for PVA Filament is between 190°C and 200°C. It's important to keep the bed temperature between 55°C and 65°C to ensure good adhesion and prevent warping. - Q: Is PVA Filament completely soluble in water?
A: PVA Filament is not completely soluble in water at room temperature. It softens in warm water (around 55-65°C), allowing you to peel off the support material easily. It is designed to be removed without damaging your printed model. - Q: How should I store PVA Filament?
A: To keep PVA Filament in good condition, store it in a cool, dry place. It comes vacuum-sealed with a desiccant to prevent moisture. After opening, make sure to keep it dry and dust-free to avoid brittleness. - Q: What are the benefits of using PVA Filament?
A: Using PVA Filament allows for easier removal of support structures, especially for complex models. It is environmentally friendly, non-toxic, and provides good bonding with various materials, making it ideal for intricate 3D printing projects. - Q: Can beginners use PVA Filament?
A: Absolutely! PVA Filament is user-friendly and great for beginners. It simplifies the process of printing complex models by providing easy-to-remove support, making it a good choice for those new to 3D printing. - Q: What should I do if my PVA Filament jams?
A: If your PVA Filament jams, check the temperature settings and ensure they are within the recommended range. Also, make sure the filament is dry and free from dust. If the problem persists, try cleaning the nozzle and reloading the filament. - Q: Where can I buy Tronxy PVA Filament?
A: You can purchase Tronxy PVA Filament directly from us. It is available in a 0.5kg spool, making it convenient for both hobbyists and professionals.
Tronxy PVA Filament: Water-Soluble 3D Support Filament 1.75mm 0.5KG Spool for 3D Printers
$39.99
For Retail - 1 Spool - No Quality Limited
