Tronxy VEHO 1000-20 Large Scale 3D Printer Print Size 1000x1000x2000mm

Remark:

VEHO-1000-20 just can shipping by sea, you can choose them when process checkout.

Tariffs are not necessarily included, the details of including tariffs or not depend on the country of the order.

More details please inquire to info@tronxy3dprinter.com.

Advantages of VEHO 1000-20:

• 1. Use smoother and more durable dual-axis metal guide rails.
• 2. Support eight languages.
• 3. Support U disk printing, also support Micro SD card offline printing.
• 4. 3.5 inch full color touch screen control.
• 5. TMC2225 uses imported silent driver chip motherboard STM32F4
• 6. The large scale 3d printer is fully enclosed for testing, and the inside of the machine can be kept warm.
• 7. Direct drive extrusion head, stable and fast extruding consumables, compatible with common consumables on the market.
• 8. Using a glass platform, printing does not warp, and the model is easy to take.
• 9. Support material breaking detection, continuous printing after power failure.
• 10. Both X / Y belts have belt adjusters.
• 11. Tempered glass / PEI hot bed can be heated to 100 degrees.
• 12. The nozzle temperature can reach up to 320°.
• 13. Z axis adopts high precision ball screw.
• 14. The static load of the hot bed is 90KG.
• 15. 1.75mm default size of the filament.
• 16. Can print filaments with a diameter of 3.0mm.

All PEI Version comes with PEI Plate and Magnetic Sticker.

Advanced Projects Created with 320°C Hot Ends

ASA Filament: ASA print temperature is 260-280 °C, and all the 2E Versions (print 2 colors) support 275 °C. If you want to print ASA, the ASA should be printed in an enclosed space, strongly recommended to use an outer housing. All other Versions (print 1 color) support 320 °C and can print ASA well.
Note: We don't have a 3D design of the enclosure, you can measure it manually once the printer gets so you can build an enclosure.
ASA can meet the needs of printed items that are exposed to wind and sun outdoors.

Veho 1000-20 Assemble

While the printer is fully assembled and powered up we do the following test:

• Verify that main board powers up and that the display is operating / displaying normal.
• Connect USB port to PC and verify communications between main board and PC. Note any discrepancies and correct.
• Manually stoke all axis movement (X,Y,Z). Verify all movement smooth and unrestricted. Note any discrepancies and correct. Look for any wobble or movement shift.
• Home all axis (X,Y,Z). Verify homing successful. Note any discrepancies and correct.
• Perform auto bed level operation. Verify accuracy of auto level operation. Note any discrepancies and correct. Bed uniformity should not be crooked or warped and bed uniformity should be within plus or minus .01mm.
• Preheat the bed to 100 deg C, then measure temp with digital thermometer to verify accuracy. Note any discrepancies and correct. Bed should reach the specified temp.
• Preheat Hot-end to maximum 320 degrees temp, then measure temp with digital thermometer to verify accuracy. Note any discrepancies and correct. Hot-end should reach the specified temp.
• Print a test print of 3D object. Verify speed, object appearance, no layer shift. Note discrepancies and correct. If the ball screws are bent, rails not straight, or machine not square this test would reveal those problems.

We assure all parts are of high quality and that all the electronics ie: mother board, power supply, stepper motors are fully tested and functional prior to shipping.

• What's the dispatch time for VEHO 1000-16 Series after paying?
  It takes around 20-30 days.

• How much extra shipping fee is required?
  Ship by sea (Estimated Delivery:45-60 Days) Free
  Ship by sea (Estimated Delivery:30-40 Days) needs $300.00 USD

1. Q: Do I have access to the code of the printer to tweak settings deeper than via touchscreen?
   A: In the online state, you can use the Marlin code to access the printer and modify some parameters, but it is not possible to modify the parameters through the firmware source code.
2. Q: Do you have printer profile for Simplify3D?
   A: It is recommended to use cura slicing software, we have the corresponding configuration files.
3. Q: How to use Ultimaker Cura for Software for VEHO series 3d printers?
   A: Tronxy units are listed on there but not the VEHO models, you can just pick the X5sa/X5st and just re-configure the print bed size.
4. Q: Would it be possible to use a 1mm or larger nozzle with this printer?
   A: Yes, it is possible to use a 1mm nozzle, the larger nozzle needs a 2.85 extruder, 1.75mm filaments will not work for the larger nozzle, need with the 3.0mm filaments. If you need the larger nozzle, can contact us to purchase 2.85 extruder and 3.0mm filaments.
5. Q: What firmware do the printers ship with? Are there any slicer profiles setup for the machines at all?
   A: The firmware has been flashed, and the configuration file will be provided with the machine.
6. Q: Are the firmware marlin? We currently run our print farm on klipper so I was just wondering if it was possible to change the firmware to klipper in the future?
   A: Yes, they are marlin, it is possible to change the firmware to klipper in the future.
7. Q: What is the flow rate?
   A: 0.6 nozzles, the recommended printing speed is 30-60.
8. Q: How quickly the table heats up. What are the capacities of the table?
   A: Heat the bed to 100 degrees for 10 minutes.
9. Q: What is the size of the thread on the hotend nozzle?
   A: The nozzle is mk8 nozzle and the thread is M6.
10. Q: What materials are the way to use the extruder, flex is interested, very soft can be 45A or 60A?
    A: The extruder is BMG, which cannot print 45A and 60A consumables.
11. Q: What accelerations are possible on this printer?
    A: The acceleration of the machine is 500.
12. Q: We would like to see the print of a bencha, a boat, at maximum speed, with a nozzle of 0.4 mm and a layer height of 0.1 mm, as well as a nozzle of 1.2 mm and also a layer height of 0.1 mm?
    A: Need to see the model printed at the fastest speed.
13. Q: Why is there only one 50w heater in hotend?
    A: 50W heating rod power is enough.
14. Q: What are the software limitations, the board is 32 bit?
    A: The slicing software of cura and prusa can be used, and the motherboard is 32-bit
15. Q: Is it possible to install klipper?
    A: Temporarily does not support klipper firmware.
16. Q: What is the version with magnetic lining? Why is the table made of glass?
    A: Glass has better flatness, so use glass.
17. Q: What tolerance can the 3d printer print to? Why is the table made of glass?
    The tolerance is about 0.2mm, but the shrinkage rate of different consumables should also be considered.
18. Q: Can we with Prusa slicer? We need it because we use it as the main slicer.
    Yes, you can use Prusa, but Prusa only can set the maximum height of 1200mm.
19. Q: Can we use the printer to print at a speed of 120mm/s with a 0.8mm nozzle and 2.85mm plastic?
    With a 0.8mm nozzle and 2.85mm plastic no problem, but the print maximum speed is 50mm/s, because the extrusion volume cannot keep up, if the speed exceeds 50mm/s, the printing effect will be intermittent.
20. Q: Hi, I wanted to ask you how many hours it takes to print a cube measuring 100 x 100 x 150 in height, and the maximum print resolution, thanks.
    15% infill, printing speed 50, about 10 and a half hours, nozzle 0.6, layer height 0.3.